Vivint Continuing Education Unit (CEU) Certification Practice Exam

These questions are part of the practice quiz. Start practicing

• True or False: Annunciators should be placed at a location that is hardest to service.
• How should sirens typically be wired?
• A residential sale is generally made in how many visits?
• Which aspect of alarm systems relates to alerting users about potential threats?
• What is the primary purpose of a control panel in a security system?
• What can be a consequence of misconnecting wires during installation?
• What percentage of the time do burglars enter homes through the garage?
• When selecting a motion detector for use in a volatile environment, which options are best?
• Which of the following is NOT a common reason for alarm system false alarms?
• Which of the following might be used with an outdoor housing for cameras?
• How many times louder is 20 decibels compared to 1 decibel?
• Which of the following is a secondary factor in determining the severity of an electrical shock?
• Which type of smoke detector is most likely to be influenced by air velocity?
• Which of the following codes is NOT applicable to ACS design?
• What electrical component is essential for controlling the flow of current in a circuit?
• Which of the following can cause other wires in a circuit to lose their intended function?
• Why did Holmes relocate his alarm business to New York City?
• Which of the following is NOT one of the three functions of an alarm system?
• How should one determine the volt amps required to power an alarm system?
• What environment is necessary for pyrolysis to occur?
• What phenomenon is described by the term 'obscuration' in outdoor microwave technology?
• What is one of the key objectives of using security systems in public spaces?
• In the case of fire alarm systems, what is the first requirement?
• Is class 2 cable permitted to be strapped to conduit for support?
• A 5 ohm and a 10 ohm resistor are wired in series. What is the total resistance?
• Which of the following is not a common hazard in fall-related injuries?
• Which of the following is NOT a type of ACS card?
• If you have 24 Volts and 3 Amps, what is the calculation for Volt-amps?
• What is the total Amp hours value mentioned for the battery in the previous example?
• For the Home Services portion of the Go!Control panel, what must be modified?
• Which statement best describes the role of smoke alarms in home safety?
• If a deficiency in the design of the alarm system is discovered, what should you do?
• An intelligent battery tester can indicate what about a battery?
• An alarm system can be controlled using which of the following?
• What does a dual-tech motion sensor utilize to enhance detection?
• Which role is primarily involved in addressing fire safety in buildings?
• What are the components of a basic CCTV system?
• What is the main purpose of a security system?
• Which of the following could be a hazard affecting motion detector performance?
• What type of cable is classified as CL2?
• Typically, the buyout on an early termination of the contract by the customer is what percentage?
• Material safety data sheets (MSDS) serve to advise workers about hazardous what?
• Which class of fire extinguishers is appropriate for fires caused by grease or fatty substances?
• What is a critical part of developing a security plan?
• What is true regarding insulators?
• What is an identity control token?
• Are terminal blocks able to be cut to size?
• What is recommended in regards to powering the fire alarm system?
• What is the primary goal of the Electronic Security and Life Safety industry?
• The National Electrical Code is known as NFPA _____.
• In the context of smoke detectors, the term 'ionization' refers to what?
• What is the proper type of coaxial cable used in video systems?
• True or False: Low voltage wiring allows for the use of any type of cable type regardless of its location.
• True or False? The recommended technique for carrying any power tool is by the cord.
• Which of the following is true for magnetic card technology?
• How far should the hole be bored from the edge of a wood member when running cable?
• Electric switches have a lot in common with which of the following?
• Which type of transformer is most commonly used in an alarm system?
• Reed switches are primarily resistant to which of the following?
• Which of the following is not required in OPR design?
• Are key fobs optional when using the Control Panel?
• In electrical terms, what does VA stand for in the context of alarm systems?
• What role does AHJ play in OPR determination?
• Which access control method requires physical interaction by users for operation?
• What is the primary concern of a code or standard?
• When reading mA or Amps on your meter, how should the probes be connected in relation to the item being checked?
• If you connect two 12 volt batteries in parallel, what will be the result in terms of voltage output?
• Which type of output is often used in alarm systems to trigger other devices?
• What percentage of home debts resulted from fires in homes lacking working smoke alarms?
• Temporal 4 is closely associated with which type of detectors?
• Which channel is not commonly used for alarm transmission to an OPR?
• What is an essential factor in establishing a code's relevance?
• What has state licensing for alarm companies aimed to achieve?
• Which type of cable can be used in environments with high airflow, like plenums?
• What color typically indicates a hot wire in electrical systems?
• Should illumination in electrical equipment rooms be solely automatic?
• What is the term for the option that allows different areas of a building to be independently armed and disarmed?
• True or False: The only time you need to test a system is at the completion of the installation.
• What is NFPA 72?
• What is the proper order for a neat and reliable installation in a security system?
• In today's age, the __________ have a lot of say in how well companies perform via technology and social media.
• A code title is always preceded by what?
• Which type of central station is monitored continuously?
• Why is an MSDS (Material Safety Data Sheet) relevant to the security industry?
• Since OSHA was founded, workplace deaths dropped from an average of 38 to how many a day?
• What type of signal is generated by a CCTV camera?
• Which wire type can be used in a plenum environment?
• Which of the following is an effective strategy to minimize workplace accidents?
• What does OSHA stand for?
• What is a common characteristic of a step up transformer?
• Which one of the following is not a kind of OPR?
• What does a fire triangle consist of?
• Which type of wiring is generally used for ground connections?
• Which of the following methods can signals use to reach the designated monitoring site?
• Which of the following is NOT a purpose of building codes?
• What type of event would typically trigger an alarm in an access control system?
• What type of meter is used to measure sound?
• What component is responsible for converting high-voltage AC to low-voltage AC in an alarm system?
• Which decibel level is indicative of a high-priority audible alarm?
• Access control systems are capable of integrating with which of the following systems?
• When modifying electrical equipment, you must stay in compliance with what?
• Which type of door lock hardware is NOT typically used in ACS?
• Is it required to have working space in the back or sides of assemblies like dead-front switchboards?
• Which of the following is an example of an intrusion detection device?
• What is the correct option for a sensor that is already installed in the Control Panel?
• Where is the "terminal block" located in the Control Panel?
• How many different names can any two-wire cable in a home be given?
• In the sequence of operation for ACS controlled doors, which action does NOT belong?
• Which organization established NRTLs?
• What governing factor determines whether working space is required around service equipment?
• What does the Enhanced Call Verification method require?
• What is necessary when adding devices to a Z-stat?
• What effect does a shortened supervised detection circuit have on terminal voltage?
• Which element is not part of the fire triangle?
• Manual fire alarm boxes should be located within what distance of each exit doorway on each floor?
• In what configuration should batteries be attached to the panel in an alarm system?
• What is the constant non-verbal flow of communication essential to understanding someone else?
• If fire cable is within 8 feet of the floor, how often should it be securely fastened?
• What does "System Armed in Away Mode, runs the LIGHTS OFF scene" represent?
• Which spot filter is considered superior in performance?
• Which of the following wires carries current back to the source?
• Which statement accurately describes the function of rules within the Control Panel?
• Is it acceptable to have other equipment located in the working space of outdoor installations?
• What is the function of the "C" wire on the Z-stat?
• What does the bridge rectifier/filter circuit in an alarm panel provide?
• What should not be done when dealing with an angry customer?
• What is the primary function of an alarm system?
• What does the term "Dead" refer to in wiring?
• What is the purpose of a certificate of occupancy?
• What is the correct classification for a cable type used for general purposes?
• Which aspect of alarm systems is critical for lowering the incidence of false alarms?
• Which of the following aspects of OSHA enforcement applies to private sector employees?
• What does OPR primarily prevent during an emergency?
• What technologies make up dual technology motion detectors?
• Which statement about stratification is false?
• Buried cable pairs can provide detection patterns up to how wide?
• What is the recommended method for identification in the alarm panel regarding alarm wiring?
• How many times a year do Nationally Recognized Testing Laboratories conduct factory inspections?
• What color must neutrals be in standard electrical wiring?
• In what situation would a bed shaker device be most effectively utilized?
• A 110 blade is used with which tool?
• What is an essential action for a successful service technician before leaving a job?
• What is the typical function of a cooling-off period for customers?
• What is the primary benefit of integrating fire systems with access control systems?
• What is considered the most significant hazard to humans during a building fire?
• Why is it important to use universal symbols in technical drawings?
• Can the same type of coax cable be used for both CATV and CCTV?
• Which of the following is a typical source of false alarms?
• How long can a 12-volt, 1 Amp hour battery power an alarm system that requires 0.5 Amps?
• Which stakeholders determine the appropriate OPR?
• When is a combination alarm system configured for both burglary and fire purposes?
• What is the maximum circuit breaker size recommended for primary wiring to an alarm system?
• According to federal law, customers are entitled to a _____ "cooling off" period once the contract is signed.
• What is a common cause of residential cooking fires?
• What is the minimum decibel level required in sleeping rooms at pillow level?
• According to NFPA 72, what is the maximum loudness for an audible fire alarm notification appliance?
• Three-way switching cables have to be divided into separate categories. Is this statement true or false?
• A document indicating what the customer received is known as a:
• If you have a circuit with 2 Amps and 6 Ohms of resistance, what is the voltage according to Ohm's Law?
• Which code governs the installation of fire alarm systems?
• When configuring an alarm system, what is a crucial consideration for sensor placement?
• Who is typically not considered a "stakeholder" in a security system project?
• When do most residential burglaries typically occur?
• What is the minimum diameter for round access openings in a manhole?
• Which one of the following elements is not part of the "4 D's" in security design principles?
• Is it true that CL3R can be substituted for CL3P?
• How might ADA guidelines affect the design of a security system?
• Using Ohm's Law, what would be the resistance in a circuit if there are 24 Volts and 6 Amps?
• According to the NFPA, the breaker supplying power to an alarm system should not exceed what amperage?
• Who is responsible for the creation of National Electrical Codes?
• Which of the following statements is true regarding OSHA guidelines?
• A customer service representative uses _______ daily to arrive at solutions for customers.
• What type of inspection is conducted by NRTLs?
• Which type of imaging device is most commonly used with analog video systems?
• Can you install a CS-Lens on a CS-Mount camera with a 5mm spacer ring?
• Which type of drill is best suited for masonry?
• According to Watt's Law, how is power calculated?
• What does the first A in RASA stand for?
• What is the most common monitoring site utilized for university alarm systems?
• What is the standard size for the imaging device in analog video systems?
• What is the function of Temporal 3 audible alarms?
• Which statement about yard signs for alarm systems is true?
• Which of the following is not considered a barrier to customer service?
• When installing outdoor photo beams, what should the installer ensure regarding the beam?
• What three factors may determine that a UL Central station is required?
• What best describes a normally open circuit?
• Using Watts law, if a series circuit has a total voltage of 24 volts and a total current of 4 amps, what is the total wattage?
• What percentage of residential fires are accounted for by cooking fires?
• Baseboard drill guides are used for drilling a hole below which of the following?
• How is a dry contact best described?
• Which of the following is crucial for ensuring effective alarm system coverage?
• Which system topology is best for retrofitting an existing building with an access control system?
• What does the "Switched" wire do in a circuit?
• Which of the following is a characteristic of an insulator?
• What is the best type of bit to use for drilling into an attic to wire a keypad?
• Which technology is known for converting electrical energy to radio waves?
• What is the power (in watts) of a circuit that has a total voltage of 10 volts and a current of 2 amps?
• What unit is used to measure electrical power?
• Which of the following items is primarily used for ensuring safe handling of hazardous materials?
• Entry/exit tones are generally accompanied by what kind of loudspeaker sound?
• What is the primary focus of an OPR?
• What is the process of destructive distillation of organic compounds in an oxygen-free environment called?
• What is the primary function of resistors in an electrical circuit?
• What characterizes a circuit in which there is only one path for electrons to flow?
• Which of the following is a key factor in determining the effectiveness of a fire extinguisher?
• To what does a low-power wireless detection device report?
• What is the minimum headroom required for working spaces around service equipment?
• What should the Control Panel expect from a sensor set to Supervisor mode?
• What does ICC stand for?
• Can a faulty detector affect the entire security system?
• What is the phone jack required to disconnect the DACT from the telephone service called?
• Should unused current transformers associated with potentially energized circuits be short-circuited?
• Which wire type is defined as being hot only when its partner traveler is not?
• What does the acronym CSAA stand for?
• What is a limitation of a bed shaker device?
• For a gigabit network, which cable type should be used?
• Is it permissible to have architectural appurtenances in the working space of electrical equipment?
• Which of the following describes a Proprietary Supervising Station?
• What is the purpose of OSHA's enforcement of regulations?
• What are the primary functions of "as-built" drawings?
• When boring through a wood member to run cable, how far should the hole be from the edge of the wood member?
• What stage is referred to as the manageable stage of a fire?
• When using B-connectors, do you need to strip back the end of wires?
• Which of the following statements about protons is true?
• What is a common characteristic of burglar targets during peak times?
• What does the divide and conquer method help with?
• The Japanese horseradish smoke alarm is an example of which sensory system?
• Which factor is crucial for motion detector placement in a home?
• What is the main purpose of a "risk" or "threat" analysis?
• During the "pre-installation survey", which of the following activities should be performed?
• Are manhole openings required to be free of protrusions?
• Using social media and review websites, consumers can affect businesses:
• If a drawing indicates coverage of a detection device, it's important not to:
• Alarm screens are generally classified as what type of installation?
• Can a wire's actual status ever change because of its intended function?
• In the context of access control systems, what is the role of a "reader"?
• What decibel loss can occur due to a closed door between a sounder and a mattress?
• What is called when two or more batteries are connected to provide more current capacity?
• Which cable has the smallest diameter?
• Emergency Forces Notification is associated with which code?
• Which document is used to track what services or items have been delivered to a client?
• What does PPE stand for in safety contexts?
• Which of the following is the most versatile screwdriver available?
• If you measure resistance and get a value of 0 Ohms, what can be concluded?
• Which one of the following led to the development of the first OPR?
• Which of the following is not a technique for conflict resolution?
• What should be done to ensure consistent power supply to an alarm system?
• What is the purpose of an alarm company yard sign?
• What does the acronym VOIP stand for?
• What does ADA stand for in the context of accessibility regulations?
• Why is it essential to consult the alarm installation manual?
• What is the total resistance of four 8 ohm horns wired in parallel?
• Which type of sensor is categorized as active in security systems?
• What sensory system is primarily engaged by audible fire alarms?
• What is the minimum battery capacity required to ensure reliability in an alarm system operation?
• A siren could be directly connected to which of the following outputs?
• What type of system is NOT typically used for fire alarm notifications?
• Which element is not associated with CPTED (Crime Prevention Through Environmental Design)?
• In a series circuit with a total voltage of 12 volts and total current of 4 amps, what is the total resistance?
• What is the main safety concern regarding the use of covers on manholes?
• What type of transformer is identified when the number of turns is greater on the primary side compared to the secondary side?
• What level of security is taut wire fence detection considered to be?
• Which of the following best describes the role of security technology in residential safety?
• In terms of voltage, what does "Hot" refer to?
• No building or structure shall be occupied without a?
• Which type of notification is NOT included in the four types of notifications for alarm systems?
• Why is hiding a spare key outside the house discouraged?
• Which of the following is a possible cause of an alarm system drawing excessively on the power supply?
• Which of the following is a characteristic of 6 AWG wire?
• What is the primary purpose of the duress alarm feature?
• What is the take-up for a stub-up when bending a 1/2" conduit?
• Which type of tone is typically used for alert notifications in security systems?
• What significant improvement did George Milliken's patent bring to burglar alarm systems?
• True or False: Remote arming stations should be positioned as close to the exit door as possible.
• Does UTP "unshielded twisted-pair" cable use Category 1 or better to transmit video instead of coax?
• What is the most common type of customer service scenario?
• What is an important consideration when designing manhole access openings?
• How often does a burglary occur according to the FBI Uniform Crime Report?
• Which of the following is a benefit of using visual notifications in alarm systems?
• Which type of keypad typically draws more current?
• Where can smoke detectors be mounted in relation to the ceiling?
• How does ambient sound affect the audibility of alarms in public settings?
• What is the maximum range of an outdoor photo beam?
• In what scenario should alarm systems be tested?
• What is the purpose of electrical tape?
• For surge suppression to be effective, which component must be known?
• What is a common use for video surveillance systems?
• Software for an alarm system should ideally be stored:
• Which of the following devices is commonly used to grant physical access within an ACS?
• What is the required current (in Amps) for a 60 Watt bulb operating at 120 Volts?
• Which of the following statements is true regarding coax cables?
• What is a primary benefit of implementing an access control system in a facility?
• In the context of alarm systems, what does "zoned" refer to?
• Drawings should have symbols that are:
• A PTZ camera can be controlled by which of the following means?
• Which of the following is NOT a common feature of ACS software?
• When do codes become enforceable?
• Which gauge wire is known to have less resistance and can carry more current?
• According to safety standards, how should electrical rooms be illuminated?
• Which component is essential for effective fire alarm systems?
• Which of the following organizations develops the International Building Code?
• What is an important consideration for positioning sensors in a security system?
• How much should manhole covers weigh to require tools for opening?
• Which aspect does not typically fall under crime prevention strategies?
• What type of output can directly power a relay?
• What should be checked regularly to prevent electrical hazards?
• What is the recommended height for mounting heat detectors on a wall?
• What would be the resistance when voltage is 12 volts and current is 3 Amps?
• Check the two answers that describe OPR advantages.
• Which of the following is not a trait of excellent customer service?
• True or False: A house with many windows can more than double the amount of wires you will need to run.
• What is one significant factor to consider for effective home security?
• Which of the following is a primary feature of effective security design?
• An unsupervised detection circuit is known to perform which of the following functions?
• What does "approved" mean in relation to a code?
• What indication does a sensor supervisory trouble suggest?